Cisco Systems manual SPA9000 Voice System Administration Guide 255

SPA9000 Field Reference

Voice tab

B

Refer Target Bye Delay	For the Refer Target Bye Delay, enter the appropriate period
	of time in seconds.
	Default: 0
Referee Bye Delay	For the Referee Bye Delay, enter the appropriate period of
	time in seconds.
	Default: 0
Refer-To Target Contact	To contact the refer-to target, select yes. Otherwise, select
	no.
	Default: no
Auth INVITE	When enabled, authorization is required for initial incoming
	INVITE requests from the SIP proxy.

Voice tab > Line page

Subscriber Information section

Display Name	Display name for caller ID.
User ID	User ID assigned by the ITSP, often the same as the DID.
Password	Password for this User ID.
Use Auth ID	To use the authentication ID and password for SIP
	authentication, select yes. Otherwise, select no to use the
	user ID and password.
	Default: no
Auth ID	Authentication ID for SIP authentication.
Call Capacity	Maximum number of calls allowed on this line interface. You
	can set a value from 1 to 15, or leave the setting as unlimited.
	Note that the SPA9000 does not distinguish between
	incoming and outgoing calls when talking about call capacity.
	NOTE Unlimited = 16.
	Default: unlimited
Contact List	List of client stations that the SPA9000 alerts when there is
	an incoming call to the line interface from the ITSP.
Cfwd No Ans Delay	Delay, in seconds, before the call forwarding of no-answer
	calls feature is triggered.
	Default: 20

SPA9000 Voice System Administration Guide 255