Cisco Systems SPA9000 manual Line 1/2/3/4, FXS Port Polarity Configuration section, Reverse

SPA9000 Field Reference

Voice tab

B

FAX Tone Detect Mode:

The method of fax tone dection: caller and callee, caller only, or callee only

Default: caller or callee

NOTE This setting allows a fax tone to be detected from either side of the call.

Voice tab > FXS 1/2 page

FXS Port Polarity Configuration section

Idle Polarity	Polarity before a call is connected: Forward or Reverse.
	Default: Forward
Caller Conn Polarity	Polarity after an outbound call is connected: Forward or
	Reverse.
	Default: Forward
Callee Conn Polarity	Polarity after an inbound call is connected: Forward or
	Reverse.
	Default: Forward

Voice tab >

Line 1/2/3/4 page

You can use the Line 1 - Line 4 pages to configure the line interfaces on your SPA9000. The line interface page includes the following sections:

•“Line Enable section,” on page 252

•“Network Settings section,” on page 252

•“SIP Settings section,” on page 252

•“Subscriber Information section,” on page 255

•“Dial Plan section,” on page 256

•“NAT Settings section,” on page 256

•“Proxy and Registration section,” on page 257

SPA9000 Voice System Administration Guide 251