Cisco Systems SPA9000 manual IVR Options, IVR Action, Parameters Menu Choice

Basic Administration of the SPA9000	2
Using the Interactive Voice Response Unit

For example, to enter the IP address 191.168.1.105 by keypad, press the following keys: 191*168*1*105. Press the # (pound) key to indicate that you have finished entering the IP address. Then press 1 to save the IP address, or press the * (star) key to cancel your entry and return to the main menu.

•If the menu is inactive for more than one minute, the SPA9000 times out. You need to re-enter the menu by pressing ****.

STEP 6 To exit the menu, hang up the telephone.

The settings that you have saved take effect after you hang up the telephone. The SPA9000 may reboot at this time.

Table 1 IVR Options

The following table shows the codes that you enter to complete various tasks in the IVR.

IVR Action	IVR	Parameters	Notes
	Menu
	Choice
Enter IVR Menu	* * * *	None	Ignore SIT or other tones
			until you hear, “Linksys
			configuration menu. Please
			enter option followed by
			the pound key or hang-up
			to exit.”
Exit IVR Menu	3948	None
Check DHCP	100	None	The IVR spells "S,T,A,T,I,C" if
			the setting is for a static IP
			address or "D,H,C,P" for a
			DHCP IP address.
Enable/Disable	101	Enter 0 to enable	Requires password
DHCP		Enter 1 to disable
Check WAN IP	110	None	IVR announces the current
Address			IP address of the WAN port.

SPA9000 Voice System Administration Guide 41