Cisco Systems SPA9000 manual Setting the Multicast Address, Click Voice tab SIP

Basic Administration of the SPA9000	2
Configuring Basic Settings

Setting the Multicast Address

For administration purposes, the SPA9000 can send the following reboot, restart, page, and ring messages to the group:

•

•

•

•

•

•

Graceful reboot: The device reboots when there are no calls in progress.

Immediate reboot: The device reboots immediately.

Graceful restart: The device restarts when there are no calls in progress.

Immediate restart: The device restarts immediately.

Group page start: One-way audio is sent from the caller to all other phones.

Group page end: An active page is terminated.

•Get ringing calls: When a user chooses Group Pickup on a phone, the SPA9000 gathers information about all ringing phones and reports this information to the requesting phone.

STEP 1 Connect to the SPA9000 administration web server, and choose Admin access with Advanced settings. (See “Connecting to the SPA9000 Administration Web Server,” on page 27).

STEP 2 Click Voice tab > SIP.

STEP 3 Scroll down to the PBX Parameters section.

STEP 4 Enter the correct multicast address in the Multicast Address field.

Voice tab > SIP > PBX Parameters Section

NOTE The default value is 224.168.168.168:6061.

SPA9000 Voice System Administration Guide 34