Cisco Systems SPA9000 manual Register Expires

Configuring Phone Lines and Calling Routing Behavior	4
Configuring Line Interfaces on the SPA9000

STEP 1 Start Internet Explorer, and then enter the IP address of the SPA9000. Click Admin Login and then click Advanced.

STEP 2 Click Voice tab > Line N, where N represents the line interface number. STEP 3 From the Line Enable drop-down list, choose yes.

STEP 4 Enter the following information:

•User ID: Enter a user ID, such as 9000.

This entry must exactly match the user ID on the SPA400 Setup > SPA9000 Interface page, User ID field. For more information, see “Configuring a SPA400 to Interoperate with the SPA9000,” on page108.

•Proxy: Enter the IP address of the SPA400.

•Register Expires: 60

This setting ensures that the SPA9000 and SPA400 are resynchronized every 60 seconds. This setting ensures that any changes in settings are synchronized on both devices.

SPA9000 Voice > Line: Subscriber Information, Proxy and Registration

SPA9000 Voice System Administration Guide 61