Cisco Systems SPA9000 Configuring a Streaming Audio Server, About the Streaming Audio Server

Configuring Music on Hold	6
Configuring a Streaming Audio Server

•path: The location and name of a music file in the correct format

•For example, if the computer local IP address is 192.168.0.5, the directory is named musicdir, and the converted music file is named jazzmusic.dat, then you would enter the following URL: tftp://192.168.0.5:69/musicdir/ jazzmusic.dat

STEP 6 Click Submit All Changes. The unit reboots. Then the unit downloads the file and stores it in flash memory.

Configuring a Streaming Audio Server

This section describes how to use and configure a streaming audio server (SAS). It includes the following topics:

•“About the Streaming Audio Server,” on page127

•“Configuring the Streaming Audio Server,” on page129

•“Using the IVR with an SAS Line,” on page130

About the Streaming Audio Server

The Streaming Audio Server (SAS) feature lets you attach an audio source to an FXS port and use it as a streaming audio source device. If the unit has multiple FXS ports, either or both of the associated lines can be configured as an SAS server.

Use a media signal adapter or “music coupler” to connect an Ethernet cable from a media source to the FXS port. For example, the MC-9700 Music Coupler has been tested with ATA devices and is available at the following URL: www.neogadgets.com/cart/ cart.php?target=product&product_id=17&substring=music+coupler

SPA9000 Voice System Administration Guide 127