Cisco Systems SPA9000 manual 814082-9xxxxxx 9,8,12-9xxxxxxxxx 9,8,011xx ,8,xx.1-8xx

Configuring Phone Lines and Calling Routing Behavior	4
Configuring Dial Plans

STEP 1 Start Internet Explorer, and then enter the IP address of the SPA9000. Click Admin Login and then click Advanced.

STEP 2 Click the PBX Status link near the top right corner or lower left corner of the page, to view the list of client stations.

STEP 3 Click the hyperlink in the IP Address column for the first phone that you want to configure. The telephone configuration page appears in a separate browser window.

STEP 4 Click the Ext 1 tab, or the tab for the extension that you want to configure.

STEP 5 Scroll down to the Dial Plan section.

STEP 6 Enter the digit sequences in the Dial Plan field.

•The default (US-based) system-wide dial plan appears automatically in the field. You can delete digit sequences, add digit sequences, or replace the entire dial plan with a new dial plan. For more information and examples, see “Digit Sequences,” on page 66.

•Separate each digit sequence with a pipe character, and enclose the entire set of digit sequences within parentheses. Refer to the following example:

(9,8<:1408>[2-9]xxxxxx 9,8,1[2-9]xxxxxxxxx 9,8,011xx. 9,8,xx.[1-8]xx)

STEP 7 Click Submit All Changes. The phone reboots.

STEP 8 If you need to configure a dial plan for any other extensions on the phone (depending on the model), click the appropriate Extension tab, enter the dial plan, and submit the changes.

STEP 9 Click the browser’s Back button to return to the list of phones.

STEP 10 Repeat this procedure for each client station that needs a unique dial plan.

STEP 11 Verify that you can successfully complete a call using each digit sequence that you entered in the dial plan.

NOTE If you hear a reorder (fast busy) tone, you need to review your entries and modify the dial plan appropriately. See “Digit Sequences,” on page 66.

SPA9000 Voice System Administration Guide 76