Cisco Systems SPA9000 Configuring Outbound Call Codec Selection Codes, Click Submit All Changes

Advanced Topics in SPA9000 Administration

Advanced Call Control and Routing

A

STEP 5 In the Group 1 Line field, or other desired Group Line field, enter the line interfaces in the order of preference. For more information, see “Call Routing Group Line Preference,” on page176.

NOTE As you make your entries, read the field labels to distinguish between the fields for Group 1 User ID ... Group 4 User ID and Group 1 Line ... Group 4 Line.

STEP 6 Click Submit All Changes.

STEP 7 To verify your progress, place a call to a phone that has caller ID, and confirm that the expected number appears.

Configuring Outbound Call Codec Selection Codes

A user can enter a code selection code before dialing a number, to choose the preferred codec for the associated call.The SPA9000 Voice System is pre- configured with default codec selection codes, but you can customize them for your site. The codes are automatically appended to the dial plan.

To select a specific codec per call, the phone user enters the code before entering the telephone number.

STEP 1 Connect to the SPA9000 administration web server, and choose Admin access with Advanced settings. (See “Connecting to the SPA9000 Administration Web Server,” on page 27).

STEP 2 Click Voice tab > Regional.

STEP 3 Scroll down to the Outbound Call Codec Selection Codes section.

SPA9000 Voice > Regional: Outbound Call Codec Selection Codes

SPA9000 Voice System Administration Guide 177