Cisco Systems manual SPA9000 Voice System Administration Guide 233

SPA9000 Field Reference

Voice tab

B

Block CID Per Call Deact	Removes caller ID blocking on the next inbound call.
Code	Default: *82
Block ANC Act Code	Blocks all anonymous calls.
	Default: *77
Block ANC Deact Code	Removes blocking of all anonymous calls.
	Default: *87
DND Act Code	Enables the do not disturb feature.
	Default: *78
DND Deact Code	Disables the do not disturb feature.
	Default: *79
CID Act Code	Enables caller ID generation.
	Default: *65
CID Deact Code	Disables caller ID generation.
	Default: *85
CWCID Act Code	Enables call waiting, caller ID generation.
	Default: *25
CWCID Deact Code	Disables call waiting, caller ID generation.
	Default: *45
Dist Ring Act Code	Enables the distinctive ringing feature.
	Default: *26
Dist Ring Deact Code	Disables the distinctive ringing feature.
	Default: *46
Speed Dial Act Code	Assigns a speed dial number.
	Default: *74
Secure All Call Act Code	Makes all outbound calls secure.
	Default: *16
Secure No Call Act Code	Makes all outbound calls not secure.
	Default: *17
Secure One Call Act	Makes the next outbound call secure. (It is redundant if all
Code	outbound calls are secure by default.)
	Default: *18
Secure One Call Deact	Makes the next outbound call not secure. (It is redundant if all
Code	outbound calls are not secure by default.)
	Default: *19
Conference Act Code	If this code is specified, the user must enter it before dialing
	the third party for a conference call. Enter the code for a
	conference call.

SPA9000 Voice System Administration Guide 233