Cisco Systems SPA9000 manual Entering a Contact List Rule

Configuring Phone Lines and Calling Routing Behavior	4
Managing Inbound Calls with the Contact List

Entering a Contact List Rule

Use the following procedure to enter a contact list rule.

STEP 1 Connect to the SPA9000 administration web server, and choose Admin access with Advanced settings.

STEP 2 Click Voice tab > Line N, where N represents the line interface number.

STEP 3 Scroll down to the Subscriber Information section.

SPA9000 Voice > Line: Subscriber Information

STEP 4 Enter the desired rules in the Contact List field. For more information, see “Example Contact List Rules,” on page 86 and “Entering a Contact List Rule,” on page 91.

NOTE The maximum length of the <Contact List> parameter is 383 characters.

STEP 5 If you included a call forward rule, modify the Cfwd No Ans Delay parameter to specify the number of seconds that elapse before a call is considered to be unanswered.

STEP 6 Click Submit All Changes. The SPA9000 reboots.

STEP 7 To verify your progress, make an inbound call and verify that the call is handled as you intended.

SPA9000 Voice System Administration Guide 91