GE JBP29G, JB570GM, JB571GM, MNU106 OPEMT~G Tm SELF-CLEA~GOWN, How to Set Delay Shrt of Cleting

Models: MNU106 JBP29G JB571GM JB570GM

1 36
Download 36 pages 56.7 Kb
Page 26
Image 26
OPEMT~G Tm SELF-CLEA~G OWN

OPEMT~G Tm SELF-CLEA~G OWN

(continued)

How to Set Delay Shrt of Cleting

Delay Start is setting the oven timer to start the clean cycle automatically at a later time than the present time of day.

NOTE: Before beginting make sure the oven clock shows the correct time of day.

For example: Let’s say it’s 7:00 and you want the oven to begin self-cleaning at 9:00 after you’re finished in the kitchen. The oven is just soiled a normal amount so the normal Clean Time of 3 hours is preferred.

1.Prepare the oven for cleaning.

2.Close the oven door and slide latch handle to the right as far as it will go. Make sure the oven light is off.

STOP 3. Push the STOP TIME button.

TIME

r4. Turn the SET knob to the time of day

SETyou want cleaning to be completed

i @ (must be more that 3X hours later than the present time of day).

CLEAN 5C~sh the CLE~ bu~on.

[ 1

Quick Reminder—Delay Start for SeM-Clean:

1.Prepare the oven for cleaning.

2.Close and latch the oven door.

3.Wsh the STOP TIME button.

4.Turn the SET knob to the time of day you want cleaning to be completed.

5.Push the CLEAN button.

6.Turn the SET knob one half turn until “3:30’ appears in the display.

r7.Turn the SET knob until “3:30’

SH

appears in the display. The words

t @

“DELAY CLEAN’ will also appear

 

in the display.

After the clean cycle starts, the word “CLEAN’ will be on in the display.

When the oven heats to a high temperature, the word “LOCK’ will be displayed and tie door latch handle will be locked in position. It will not be possible to open the oven door until the temperature drops below the lock temperature.

When the clean cycle is finished, the word “CLEAN’ will go out in the display and the oven will begin to cool. When the oven temperature has fallen below the locking temperature the word “LOCK” goes out and the door can be opened.

8.When the LOCK light is

off, slide handle to the left ~ as far as it will go and

open the door.

+

U,lllll

 

 

 

Never force the latch handle. Wait until the word “LOCK’ goes out in the display and the latch slides easily. Forcing the door handle may damage the door lock.

NOTE: During a delayed self-clean operation, you can find out when the oven will start cleaning by pushing and holding the CLEAN button.

Page 26
Image 26
GE JBP29G, JB570GM, JB571GM, MNU106 manual OPEMT~G Tm SELF-CLEA~GOWN, How to Set Delay Shrt of Cleting