GE JB571GM, JB570GM Ques~Ons? Usethis Problem Solver, PROBLEM ‘&B~~G” OR “0~~’, Poss~Le, Cause

QUES~ONS?●

USETHIS PROBLEM SOLVER

PROBLEM

‘&B~~G” OR “0~~’

ODOR E-ING FROM OVEN WEN TURNED ON

OVEN LIGHT

DOES NOT WORK

OVEN WILL

NOT WORK

FOOD DOES NOT

BROL PROPERLY

FOOD DOES NOT

ROAST OR BAKE

PROPERLY

OVEN ~LL NOT

SELF-CLEAN

OVEN DOOR WON’T OPEN

~R SELF-CLEAN CYCLE

OVEN NOT CLEAN AFTER CLEAN CYCLE

OVEN DOOR ACC~ENTALLY LOCKED D~NG COO~NG

SURFACE LAMP DOES NOT WORK (on some models)

OVEN TEMPERATURE TOO HOT OR TOO COLD

POSS~LE	CAUSE
● This is nod	in a new oven and will dissipate in time. To speed the process,

set a self-clean cycle (see the Operating the Self-Cleaning Oven section) lasting at least 3 hours.

●Light bulb is loose or defective. Tighten or replace.

●Switch operating oven light is broken. Call for service.

●The plug on the range is not completely inserted in the electrical outlet.

●The circuit breaker in your house has been tripped, or a fuse has been blown.

●The oven controls are not properly set.

●Oven not set on Broil.

●Oven temperature not set correctly.

●Improper shelf position being used. See the Broiling Guide.

●Food is being cooked on hot pan.

●Cookware is not suited for broiling.

●Aluminum foil used on the broil pan rack has not been fitted properly and slit as recommended.

●Oven not set on Bake.

●Oven temperature is not set correctly.

●Shelf position is incorrect. See the Roasting or Baking sections.

●The oven shelf is not level,

●Incorrect cookware or cookware of improper size is being used.

●A foil tent was not used when needed to slow down browning during roasting.

. The Stop Time must be more tahn 3‘/2 hours later than the Start Time.

●The oven temperature is too high to set the self-clean operation. Allow the range to cool and reset the controls.

●The door latch handle not moved all the way to the right.

●The oven must cool below locking temperature.

QThe oven contiols are not set properly.

●Heavy spillovers should be cleaned up before starting clean cycle.

●Push the CANCEL button. Allow the oven to cool. Never force the door lock handle.

●The fluorescent lamp is loose or defective. Adjust or replace.

●Press switch for 2 seconds. H lamp does not come on, repeat.

●The switch operating the oven light is broken. Call for service.

●The oven thermostat needs adjustment. See the Do It Yoursel~– Adjust the Oven Thermostat section.

(continued next page)

33