How to Set Oven for Cleaning
Quick Reminder:
1.Repare the oven for cleaning.
2.Close and latch the oven door.
3.Wsh the CLEAN button.
4.Turn the SET knob to set the clean time.
1.Follow the steps to prepare the oven for cleaning.
2.Close the oven door and
slide latch handle to the right as r far as it will go.
Never force the door latch |
|
han~e. Forcing the handle may damage the door lock mechanism.
CLEAN 3. fish the CLEAN bufion.
n
I4. Turn the SET knob one half turn. The
Sfldisplay will show “3:30’: 1 @
The
on the display. When the oven heats to a high temperature, the word “LOCK’ will be displayed and the door latch handle will be locked in position. It will not be possible to open the oven door until the LOCK light goes off and the oven has cooled below locking temperature. If you cannot slide tie latch easily to unlock the door, allow additional time for cooling.
The word “DOOr” is displayed if you try to set a clean cycle without latching the door or if the oven temperature is too high.
After a Clan Cycle
When the clean cycle is finished, the word “CLEAN’ will go out in the display and the oven will begin to cool. When the oven temperature has fallen below the locking temperature, the word “LOCK’ goes out and the door can be opened.
When the LOCK light is off |
| |
and the oven has cooled below | ~ | |
the locking temperature, slide | ||
| ||
latch handle to the left as far as | Ullllll | |
it will go and open the door. | ||
+ |
Never force the latch handle. The latch slides easily. Forcing the latch handle may damage the door lock.
After a clean cycle, you may notice some white ash in the oven. Just wipe it up with a damp cloth.
If white spots remain, remove them with a soap- filled steel wool pad. Be sure to rinse thoroughly with a vinegar and water mixture. These deposits are usually a sdt residue that cannot be removed by the clean cycle.
If the oven is not clean after 1 clean cycle, the cycle may be repeated.
(continued nextpage)
25
