Tascam CD-X1700 owner manual Specifications, Error Messages, English

5. Specifications			English
Disc type:	8cm / 12cm CD	Dimensions (W x H x D mm)
Number of channels:	2-channel	Main unit:	482 x 94 x 272
Resolution:	16-bit	Remote control unit:	482 x 132 x 83
Sampling frequency:	44.1kHz	Weight
Analog output:	RCA pin jack	Main unit:	5.7kg
Output impedance:	<1kohm	Remote control unit:	2.5kg
Maximum output level:	+6dBV
Digital output:	Coaxial	The following values are applicable when key and
Format:	IEC60958 Type II	tempo values are set to 0.
Voltage requirements
USA/Canada:	120V AC, 60Hz	Frequency response: 20 – 20kHz, +0.5/-1.0dB
UK/Europe:	230V AC, 50Hz	Dynamic range:	>95dB
Australia:	240V AV, 50Hz	S/N ratio:	>95dB
Power consumption:	30W	Total harmonic distortion:	<0.01%
Peak inrush current:	0.9A
Applicable electromagnetic
environment:	E4

Error Messages

Err 01 TOC Read error - the disc's Table of Contents cannot be read within 20 seconds - try with another disc or remove and clean the existing disc before replacing it

Err 02 GFS error – GFS signal cannot be detected within five seconds - try with another disc or remove and clean the existing disc before replacing it

Err 03 Focus error - after repeating the attempt eight times to focus, an error still occurs - try with another disc or remove and clean the existing disc before replacing it

Err 04 Sub-Q error - the sub-Q code cannot be detected (twice within five seconds) - try with another disc

Err 05 Loading error - the open or close operation cannot be completed, even after retries, or there is an internal error - make sure that there are no obstructions preventing the tray's operation

Err 06 Sled error - an internal drive error - try turning the power off, waiting a few seconds, and turning it on again

Err 07 Error in communication between decks - try turning the unit off, waiting a few seconds, and turning it on again

Err 10 S-DRAM error - an internal S-DRAM error - try turning the power off, waiting a few seconds, and turning it on again

If any of the numbered error messages occur, try using another disc.

If the errors continue with a number of discs, turn the unit off, wait for a few seconds, and turn it on again. If the errors still continue or other error occurs, contact your TASCAM distributor for repair.

TASCAM CD-X1700 DUAL CD PLAYER 25