2. Functions and Controls | English |
|
|
2-5. Remote Controller (LCD)
.M indicator
If there is track memory data for the current selected track in the current selected memory bank, this indicator lights.
/TRACK indicator
!REMAIN indicator
When the time mode is set to remain time mode, this indicator lights.
@SINGLE indicator
When the play mode is set to single play, this indicator lights.
#PGM indicator
When the play mode is set to programmed play, this indicator lights.
$MP3 indicator
When a MP3
%Time display
This section is used to show track number, time values or messages.
^FLASH indicator
When flash start is activated, this indicator lights. Flash start mode is on by default, or the last setting of flash start will be retained. If you set it to OFF then turn the power off, when power is turned back on, flash start will be OFF.
&Memory bank indicators
Lights the current selected memory bank indicator.
*A.CUE indicator
Lights when AUTO CUE function is turned on.
(A.RDY indicator
Lights when AUTO READY function is activated.
)RELAY indicator
Lights when relay play is set to on.
QLOOP indicator
Lights when loop play is engaged.
WS indicator
Lights when loop mode is set to single loop.
EALL indicator
Lights when loop mode is set to all loop.
RTime Address Bar
Shows the current play position relative to the current track.
TPAR indicator
Lights when parameter display shows the effect parameter.
YTEMPO indicator
Lights when parameter display shows the TEMPO value.
UKEY indicator
Lights when parameter display shows the key value.
Lights when key value is set to other than 0%.
IParameter display
Displays the various parameters.
OTAP indicator
Lights when parameter display shows the tap value.
PBPM indicator
Lights when parameter display shows the auto BPM value.
ADIR indicator
When a MP3
SKEY ORIGINAL indicator
Lights when key original function is activated.
TASCAM
