2. Functions and Controls | English |
|
|
Pressing and holding the SHIFT key while pressing this key selects the parameter display mode.
TEMPO ∑ KEY ∑ TAP ∑ BPM (∑ DIR).
tSCRATCH key
Turns the scratch play mode on and off. When scratch play mode is on, this key lights and scratch can be performed by Jog wheel. (∑ page 15)
yBRAKE key
Turns the brake function on and off and sets the brake time using the Jog wheel. (∑ page 15) Turns the relay play on and off. (∑ page 20)
uREVERSE key
Changes the playback direction between forward and backward. (∑ page 17)
iSEARCH key
Turns on or off the Search function on the Jog wheel. When this key is lit, the Jog wheel acts as a search dial.
After 5 seconds without search operation, the unit will exit the search mode automatically.
oTrack Skip keys
Use these to perform track searches.
pCUE key
Locates to the cue point, then pauses.
Stutter play can be performed with this key. (∑ page 12)
Selects the CUE key’s operation mode. (∑ page 12)
aPLAY/PAUSE key
Changes the playback mode between playback and pause.
The light stays on solid in playback mode and flashes in pause mode
sJog Wheel
The following functions can be controlled by the Jog wheel.
•Search
•Pitch Bend
•Scratch
•Brake time
•Key control
•Preset menu
•Effect parameters
•Sampler tempo/level
•Program edit
•Track memory number select
dFX SYNC key
Turns on and off synchronization of the effect time with the MPB. (∑ page 16)
fFLANGE key
Turns the Franger effect on and off. (∑ page 16)
gECHO key
Turns the Echo effect on and off. (∑ page 16)
hFILTER key
Turns the Filter effect on and off. (∑ page 16)
jFLASH / RECALL / DEL key
Turns the flash start mode on and off. (∑ page 12) Recalls the track memory data. (∑ page 19) Deletes the current selected song from the program list. (∑ page 22)
kSET / MEMO / INS key
Set the cue points with CUE
lCUE
Depending on the setting, these keys locate to cue points, flash start from cue points (default), or stutter play from cue points. (∑ page 12)
;LOOP, A, and B keys
Sets or erases the loop points, or engages or disengages the loop playing. (∑ page 13)
zSAMPLE keys
This key lights when sample playback takes place and flashes when sample recording takes place. Press and hold this key and press the IN key to enter reverse sample playback mode, and press and hold this key and press the OUT key to enter loop sample playback mode. (∑ page 17)
TASCAM