English | 2. Functions and Controls |
|
|
xIN and OUT keys
Use these keys to record and clear the sampled sound. When you have recorded the sample, these keys will light. Start and stop sample playback using these keys. (∑ page 17)
Pressing and holding the IN key then using the Jog wheel controls the sampler output level.
cLOOP and REV LEDs
Indicates the sampler playback mode. (∑ pages 17 - 18)
vKEY ORIG / KEY key
Turns the KEY ORIGINAL function on and off. (∑ page 14)
Sets the key control value. (∑ page 15)
bTEMPO / BANK key
Selects the tempo range, either
Selects the track memory bank from A to E. (∑ page 18)
nBEND +/ A.RDY, –/A.CUE keys
Use these keys to perform pitch bending. (∑ page 14)
Turns the AUTO CUE function on and off. (∑ page 20)
Turns the AUTO READY function on and off. (∑ page 20)
mTEMPO slider
Changes the playback tempo. (∑ page 14)
2-4. Remote Controller (Bottom Panel)
,Remote Connector
Connect this to the REMOTE connector on the rear panel of the main unit.
WARNING
…DO NOT use any cable except the cable supplied with the
…Connect the cable to the
10 TASCAM