Yamaha RX-V657 owner manual Error

AUTO SETUP

The results displayed in the RESULT:EXIT screen are as follows:

SP	The number of connected speakers
	displayed in the order:
DIST	Front/Back/Subwoofer
	The distance of the speakers from this
	unit displayed in the order:
	Closest speaker distance/Farthest
LVL	speaker distance
	The speaker output level displayed in
	the order:
	Lowest output level/Highest output
	level

•If you selected AUTO in step 5, “WAITING” appears when the auto setup procedure is started, then loud test tones are output from each speaker in turn.

•If you selected DEFAULT, RELOAD or UNDO in step 5, no test tones are output.

•If an ERROR screen appears, see “If an error screen appears” on page 26.

•If a WARNING screen appears, see “If a warning screen appears” on page 27.

y

You can display the detailed result information by using d and ENTER to select “RESULT”. In the detailed result information screen, you can switch information by pressing u / d / j / i.

7Press j / i to select SET or CANCEL, then press ENTER to return to the SET MENU screen.

RESULT:EXIT

SP : 5/4/0.1

DIST: 10.0/ 12.0ft

LVL : -9.0/ +6.5dB

.>SET CANCEL

p p

SET	To apply the auto setup (YPAO)
	settings.

CANCEL To cancel the auto setup (YPAO) without making any changes.

y

If you are not satisfied with the result or want to manually adjust each setup parameter, use the manual setup parameters (see page 52).

Notes

• If E-10 appears during testing, restart the procedure from step 3.

• To cancel the auto setup procedure before completion, press u.

■If an error screen appears

Use u / d / j / i to select RETRY or EXIT, then press ENTER.

ERROR

.E-9:USER CANCEL

.Don't operate

.any function.

.
p	p

RETRY	To retry the auto setup procedure.
EXIT	To exit auto setup.

26