Yamaha RX-V657 To turn on all units the main unit and Zone 2 unit, For DVDs encoded in DTS

Note

The remote control returns to the main mode 10 seconds after you

press , or if you press any button other than SYSTEM POWER, STANDBY, MUTE, VOLUME +/– or the input selector buttons. If the TRANSMIT indicator is turned off, press

to set the remote control to Zone 2 mode before turning Zone 2 power on or off, changing the input source, or muting the sound.

ZONE 2

■To control the power of the main unit and Zone 2 unit

To turn all units (the main unit and Zone 2 unit) to standby:

While holding down AMP, press STANDBY.

To turn on all units (the main unit and Zone 2 unit):

While holding down AMP, press SYSTEM POWER.

y

STANDBY and SYSTEM POWER work differently depending on the selected mode.

Mode	TRANSMIT	STANDBY/
	indicator	SYSTEM POWER
		Press STANDBY to turn
Main mode	Off	the main unit to standby.
		Press SYSTEM POWER
		to turn on the main unit.
		Press STANDBY to turn
		the Zone 2 component to
Zone 2 mode	On	standby.
		Press SYSTEM POWER
		to turn on the Zone 2
		component.

■Special considerations for DTS software

The DTS signal is a digital bitstream. If you attempt to send the DTS signal to the second room you will only hear digital noise (that may damage your speakers). Thus, the following considerations and adjustments need to be made when playing DTS-encoded discs.

For DVDs encoded in DTS

Only 2 channel analog audio signals may be sent to the second room.

Use the disc menu to set the DVD player’s mixed

2-channel left and right audio outputs to the PCM or Dolby Digital soundtrack.

For CDs encoded in DTS

To avoid unexpected noise, DO NOT USE the Zone 2 feature with CDs encoded in DTS.

OPERATION ADVANCED

English

73