Yamaha RX-V657 owner manual SET Menu, Auto Setup, Manual Setup, Sound Menu, Input Menu

SET MENU

You can use the following parameters in SET MENU to adjust a variety of system settings and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment.

■AUTO SETUP

Use to specify which speaker parameters auto setup will adjust, and to activate the auto setup procedure (see page 24).

■MANUAL SETUP

Use to manually adjust speaker and system parameters.

1 SOUND MENU

Use to manually adjust any speaker setting, alter the quality and tone of the sound output by the system or compensate for video signal processing delays when using LCD monitors or projectors.

y

Most of the parameters described in SOUND MENU are set automatically when you run auto setup (see page 24). You can use SOUND MENU to make further adjustments, but we recommend running auto setup first.

Item	Features	Page
A)SPEAKER SET	Selects the size of each speaker, the speakers for low-frequency signal output, and the cross over	56
	frequency.
B)SPEAKER LEVEL	Adjusts the output level of each speaker.	58
C)SP DISTANCE	Adjusts the delay time of each speaker.	59
D)EQUALIZER	Adjusts the tonal quality of the center speaker.	59
E)LFE LEVEL	Adjusts the output level of the LFE channel for Dolby Digital or DTS signals.	60
F)DYNAMIC RANGE	Adjusts the dynamic range for Dolby Digital or DTS signals.	60
G)AUDIO SET	Customizes the muting level, audio delay and tone bypass settings.	60

2 INPUT MENU

Use to reassign digital input/outputs, select the input mode or rename your inputs.

Item	Features	Page
A)I/O ASSIGNMENT	Assigns jacks according to the component to be used.	61
B)INPUT MODE	Selects the initial input mode of the source.	62
C)INPUT RENAME	Changes the name of the inputs.	62
D)VOLUME TRIM	Adjusts the output volume of each jack.	62

OPERATION ADVANCED

English

53