Yamaha RX-V657 owner manual Setting remote control codes, Remote Control Code Default Settings

REMOTE CONTROL FEATURES

Setting remote control codes

You can control other components by setting the appropriate remote control codes. Codes can be set up for each input area. For a complete list of available remote control codes, refer to “LIST OF REMOTE CONTROL CODES” at the end of this manual.

The following table shows the default component (Library: component category) and the remote control code for each area.

Remote Control Code Default Settings

Input	Library		Default
	(component	Manufacturer	YAMAHA
area
	category)		code
CD	CD	YAMAHA	0005
MD/CD-R	MD	YAMAHA	0024
TUNER	TUNER	YAMAHA	0023
DVD	DVD	YAMAHA	0098
DTV/CBL	–	–	–
V-AUX	–	–	–
VCR 1	–	–	–
DVR/VCR2	DVR	YAMAHA	0208
	–	–	–

Note

You may not be able to operate your YAMAHA component even if a YAMAHA remote control code is initially set as listed above. In this case, try to set other YAMAHA remote control code(s).

1Press an input selector button or to select the component you want to set up.

2Press CODE SET using a ballpoint pen or similar object.

The TRANSMIT indicator on the remote control flashes twice.

TRANSMIT

CODE SET

3Press the numeric buttons (0 to 9) to enter the four-digit remote control code for the component to be used.

Refer to “LIST OF REMOTE CONTROL CODES” at the end of this manual.

1	2	3	4
5	6	7	8
9	0	10

The TRANSMIT indicator on the remote control flashes twice, and the remote control code for the selected component is set.

Notes

•If the manufacturer of your component has more than one code, try each of them until you find the correct one.

•If you wait for more than 30 seconds during step 3, the setup process is canceled. If this happens, start over from step 2.

68