Nortel Networks 40M2420 manual Cfg/l3/vrrp/group/track

Alteon OS Command Reference

/cfg/l3/vrrp/group/track

Virtual Router Group Priority Tracking Configuration

[Virtual Router		Group Priority	Tracking Menu]
ifs	-	Enable/disable	tracking	other interfaces
ports	-	Enable/disable	tracking	VLAN switch ports
cur	-	Display current VRRP Group Tracking configuration

NOTE – If Virtual Router Group Tracking is enabled, then the tracking option will be available only under group option. The tracking setting for the other individual virtual routers will be ignored.

Table 6-100Virtual Router Group Priority Tracking Menu (/cfg/l3/vr/group/track)

Command Syntax and Usage

ifs disableenable

When enabled, the priority for this virtual router will be increased for each other IP interface active on this switch. An IP interface is considered active when there is at least one active port on the same VLAN. This helps elect the virtual routers with the most available routes as the master. This command is disabled by default.

ports disableenable

When enabled, the priority for this virtual router will be increased for each active port on the same VLAN. A port is considered “active” if it has a link and is forwarding traffic. This helps elect the virtual routers with the most available ports as the master. This command is disabled by default.

cur

Displays the current configuration for priority tracking for this virtual router.

304 „ Chapter 6: The Configuration Menu 40M2420, April 2007