Nortel Networks 40M2420 Cfg/sys/syslog, System Host Log Configuration, Console disableenable

Alteon OS Command Reference

/cfg/sys/syslog

System Host Log Configuration

[Syslog Menu]	- Set IP address of first syslog host
host
host2	- Set IP address of second syslog host
sever	- Set the severity of first syslog host
sever2	- Set the severity of second syslog host
facil	- Set facility of first syslog host
facil2	- Set facility of second syslog host
console	- Enable/disable console output of syslog messages
log	- Enable/disable syslogging of features
cur	- Display current syslog settings

Table 6-3Host Log Menu Options (/cfg/sys/syslog)

Command Syntax and Usage

host <new syslog host IP address (such as, 192.4.17.223)>

Sets the IP address of the first syslog host.

host2 <new syslog host IP address (such as, 192.4.17.223)>

Sets the IP address of the second syslog host.

sever <syslog host local severity (0–7)>

This option sets the severity level of the first syslog host displayed. The default is 7, which means log all severity levels.

sever2 <syslog host local severity (0–7)>

This option sets the severity level of the second syslog host displayed. The default is 7, which means, log all severity levels.

facil <syslog host local facility (0-7)>

This option sets the facility level of the first syslog host displayed. The default is 0.

facil2 <syslog host local facility (0-7)>

This option sets the facility level of the second syslog host displayed. The default is 0.

console disableenable

Enables or disables delivering syslog messages to the console. When necessary, disabling con- sole ensures the switch is not affected by syslog messages. It is enabled by default.

log <featureall> <enabledisable>

Displays a list of features for which syslog messages can be generated. You can choose to enable/ disable specific features (such as vlans, stg, or servers), or enable/disable syslog on all available features.

cur

Displays the current syslog settings.

40M2420, April 2007 Chapter 6: The Configuration Menu „ 177