Nortel Networks 40M2420 manual Cfg/l3/vrrp/group, Virtual Router Group Configuration

Models: 40M2420

1 382
Download 382 pages 56.7 Kb
Page 302
Image 302

Alteon OS Command Reference

/cfg/l3/vrrp/group

Virtual Router Group Configuration

[VRRP Virtual

Router Group Menu]

track

- Priority Tracking Menu

vrid

- Set virtual router ID

if

- Set interface number

prio

- Set renter priority

adver

- Set advertisement interval

preem

- Enable or disable preemption

ena

- Enable virtual router

dis

- Disable virtual router

del

- Delete virtual router

cur

- Display current VRRP virtual router configuration

The Virtual Router Group menu is used for associating all virtual routers into a single logical virtual router, which forces all virtual routers on the GbE Switch Module to either be master or backup as a group. A virtual router is defined by its virtual router ID and an IP address. On each VRRP-capable routing device participating in redundancy for this virtual router, a virtual router will be configured to share the same virtual router ID and IP address.

NOTE This option is required to be configured only when using at least two GbE Switch Mod- ules in a hot-standby failover configuration, where only one switch is active at any time.

Table 6-99Virtual Router Group Menu Options (/cfg/l3/vrrp/group)

Command Syntax and Usage

track

Displays the VRRP Priority Tracking Menu for the virtual router group. Tracking is an Alteon OS proprietary extension to VRRP, used for modifying the standard priority system used for electing the master router. To view menu options, see page 304.

vrid <virtual router ID (1-1024)>

Defines the virtual router ID.

The vrid for standard virtual routers (where the virtual router IP address is not the same as any virtual server) can be any integer between 1 and 1024. All vrid values must be unique within the VLAN to which the virtual router’s IP interface (see if below) belongs. The default virtual router ID is 1.

if <interface number (1-127)>

Selects a switch IP interface. The default switch IP interface number is 1.

302 „ Chapter 6: The Configuration Menu

40M2420, April 2007

Page 302
Image 302
Nortel Networks 40M2420 manual Cfg/l3/vrrp/group, Virtual Router Group Configuration