Nortel Networks 40M2420 manual Alteon OS Syslog Messages

APPENDIX A

Alteon OS Syslog Messages

The following syntax is used when outputting syslog messages:

<Time stamp><Log Label>Web OS<Thread ID>:<Message>

where

„<Timestamp>

The time of the message event is displayed in month day hour:minute:second format. For example: Aug 19 14:20:30

„<Log Label>

The following types of log messages are recorded: LOG_EMERG, LOG_ALERT,

LOG_CRIT, LOG_ERR, LOG_WARNING, LOG_NOTICE, LOG_INFO, and LOG_DEBUG

„<Thread ID>

This is the software thread that reports the log message. The following thread IDs are recorded: stg, ip, console, telnet, vrrp, system, web server, ssh, and bgp

„<Message>: The log message

Following is a list of potential syslog messages. To keep this list as short as possible, only <Thread ID> and <Message> are shown. The messages are sorted by <Log Label>.

Where the <Thread ID> is listed as mgmt, one of the following may be shown: console, telnet, web server, or ssh.

LOG_WARNING

FILTER “filter <filter number> fired on port <port number>, <source IP address> -><desti- nation IP address>, [<ICMP type>], [<IP protocol>], [<TCP f1ags>]”

40M2420, April 2007 353