Nortel Networks 40M2420 manual Cfg/l3/ospf, Open Shortest Path First Configuration

Alteon OS Command Reference

/cfg/l3/ospf

Open Shortest Path First Configuration

[Open Shortest Path First Menu]
aindex	- OSPF Area (index) menu
range	- OSPF Summary Range	menu
if	- OSPF Interface menu	menu
virt	- OSPF Virtual Links
md5key	- OSPF MD5 Key Menu
host	- OSPF Host Entry menu
redist	- OSPF Route Redistribute menu
lsdb	- Set the LSDB limit
default	- Originate default route information
on	- Globally turn OSPF	ON
off	- Globally turn OSPF	OFF
cur	- Display current OSPF configuration

Table 6-72OSPF Configuration Menu (/cfg/l3/ospf)

Command Syntax and Usage

aindex <area index (0-2)>

Displays the area index menu. This area index does not represent the actual OSPF area number. See page 271 to view menu options.

range <range number (1-16)>

Displays summary routes menu for up to 16 IP addresses. See page 272 to view menu options.

if <interface number (1-127)>

Displays the OSPF interface configuration menu. See page 273 to view menu options.

virt <virtual link (1-3)>

Displays the Virtual Links menu used to configure OSPF for a Virtual Link. See page 275 to view menu options.

md5key <key ID (1-255>

Assigns a string to MD5 authentication key.

host <host entry number (1-128)>

Displays the menu for configuring OSPF for the host routes. Up to 128 host routes can be config- ured. Host routes are used for advertising network device IP addresses to external networks to per- form server load balancing within OSPF. It also makes Area Border Route (ABR) load sharing and ABR failover possible. See page 276 to view menu options.

redist fixedstaticripebgpibgp

Displays Route Distribution Menu. See page 277 to view menu options.

lsdb <LSDB limit (0-2000, 0 for no limit)>

Sets the link state database limit.

40M2420, April 2007 Chapter 6: The Configuration Menu „ 269