Nortel Networks 40M2420 manual Cfg/l3/mroute, IP Multicast Route Configuration

Alteon OS Command Reference

/cfg/l3/mroute

IP Multicast Route Configuration

[IPMC Static Route Menu]

add	- Add static IP		Multicast route
rem	-	Remove static	IP Multicast route
cur	-	Display current static IPMC route configuration

The following table describes the IP Multicast Route menu options.

Table 6-62IP Static Route Configuration Menu Options (cfg/l3/mroute)

Command Syntax and Usage

add <IPMC destination> <vlan> <port> primarybackuphost <virtual router idnone>

Adds a static multicast route. You will be prompted to enter a destination IP address (in dotted dec- imal notation), VLAN, and member port. Indicate whether the route is used for a primary, backup, or host multicast router.

rem <IPMC destination> <vlan> <port> primarybackuphost <virtual router idnone>

Removes a static multicast route. The destination address, VLAN, and member port of the route to remove must be specified.

cur

Displays the current IP multicast routes.

40M2420, April 2007 Chapter 6: The Configuration Menu „ 257