Nortel Networks 40M2420 manual Cfg/l3/igmp/mrtr Mrouter number, Version

Alteon OS Command Reference

Table 6-87IGMP Relay Menu Options (/cfg/l3/igmp/relay)

Command Syntax and Usage

dis

Disables IGMP Relay.

cur

Displays the current IGMP Relay configuration.

/cfg/l3/igmp/mrtr <Mrouter number>

IGMP Relay Multicast Router Configuration

[Multicast router 2 Menu]

addr	- Set IP address of multicast router
intr	- Set interval between ping attempts
retry	- Set number of failed attempts to declare router DOWN
restr	- Set number of successful attempts to declare router UP
version	- Set IGMP version
ena	- Enable multicast router
dis	- Disable multicast router
del	- Delete multicast router
cur	- Display current multicast router configuration

Table 6-90describes the commands used to configure the IGMP Relay multicast router.

Table 6-88IGMP Relay Mrouter Menu Options (/cfg/l3/igmp/relay/mrtr)

Command Syntax and Usage

addr <IP address (such as 224.0.1.0)>

Configures the IP address of the IGMP multicast router used for IGMP Relay.

intr <1-60>

Configures the time interval between ping attempts to the upstream Mrouters, in seconds. The default value is 2.

retry <1-120>

Configures the number of failed ping attempts required before the switch declares this Mrouter is down. The default value is 4.

restr <1-128>

Configures the number of successful ping attempts required before the switch declares this Mrouter is up. The default value is 5.

version <1-2>

Configures the IGMP version (1 or 2) of the multicast router.

40M2420, April 2007 Chapter 6: The Configuration Menu „ 289