Nortel Networks 40M2420 manual Cfg/l3/nwf, Network Filter Configuration

Alteon OS Command Reference

/cfg/l3/nwf

Network Filter Configuration

[IP Network Filter		1 Menu]
addr	- IP	Address
mask	- IP	Subnet mask
enable	- Enable Network Filter
disable	- Disable Network Filter
delete	- Delete Network Filter
cur	- Display current Network Filter configuration

Table 6-66IP Network Filter Menu Options (/cfg/l3/nwf)

Command Syntax and Usage

addr <IP address, such as 192.4.17.44>

Sets the starting IP address for this filter. The default address is 0.0.0.0.

mask <subnet mask, such as 255.255.255.0>

Sets the IP subnet mask that is used with /cfg/l3/nwf/addr to define the range of IP addresses that will be accepted by the peer when the filter is enabled. The default value is 0.0.0.0.

For Border Gateway Protocol (BGP), assign the network filter to a route map, then assign the route map to the peer.

enable

Enables the Network Filter configuration.

disable

Disables the Network Filter configuration.

delete

Deletes the Network Filter configuration.

cur

Displays the current the Network Filter configuration.

40M2420, April 2007 Chapter 6: The Configuration Menu „ 261