Nortel Networks 40M2420 manual ACL Port Metering Menu

Alteon OS Command Reference

/cfg/port <port alias or number> aclqos/meter <meter number>

ACL Port Metering Menu

[Metering Menu]		Set committed rate in KiloBits/s
cir	-
mbsize	-	Set maximum burst size in KiloBits
enable	-	Enable/disable port metering
dpass	-	Set to Drop or Pass out of profile traffic
assign	-	Assign meter to ACL, ACL block or ACL group
unassign	-	Unassign meter from ACL, ACL block or ACL group
reset	-	Reset meter parameters
cur	-	Display current settings

This menu defines the Access Control profile for the selected ACL group on the port.

Table 6-28ACL Metering Menu Options (/cfg/port/aclqos/meter)

Command Syntax and Usage

cir <64-1000000>

Configures the committed rate, in Kilobits per second. The committed rate must be a multiple of 64.

mbsize <32-4096>

Configures the maximum burst size, in Kilobits. Enter one of the following values for mbsize: 32, 64, 128, 256, 512, 1024, 2048, 4096

enable ed

Enables or disables ACL Metering on the port.

dpass droppass

Configures the ACL Meter to either drop or pass out-of-profile traffic.

assign aclblkgrp <1-4096>

Adds an ACL, ACL Block, or ACL Group to the ACL Meter on this port.

unassign aclblkgrp <1-4096>

Removes an ACL, ACL Block, or ACL Group from the ACL Meter on this port.

reset

Reset ACL Metering parameters to their default values.

cur

Displays current ACL Metering parameters.

212 „ Chapter 6: The Configuration Menu 40M2420, April 2007