Nortel Networks 40M2420 manual Configure Gigabit Ethernet port autonegotiation mode

Alteon OS Command Reference

3.Configure Gigabit Ethernet port autonegotiation mode.

If you selected a port that has a Gigabit Ethernet connector, the system prompts:

Port Auto	Negotiation:	on
Current Port EXT1 autonegotiation:
Enter new	value ["on"/"off"]:

Enter on to enable port autonegotiation, off to disable it, or press <Enter> to keep the current setting.

4.If configuring VLANs, enable or disable VLAN tagging for the port.

If you have selected to configure VLANs back in Part 1, the system prompts:

Port VLAN tagging config (tagged port can be a member of multiple VLANs)

Current TAG support:disabled Enter new TAG support [d/e]:

Enter d to disable VLAN tagging for the port or enter e to enable VLAN tagging for the port. To keep the current setting, press <Enter>.

5.The system prompts you to configure the next port:

Enter port (INT1-14, MGT1-2, EXT1-6):

When you are through configuring ports, press <Enter> without specifying any port. Other- wise, repeat the steps in this section.

40M2420, April 2007 Chapter 2: First-Time Configuration „ 37