Nortel Networks 40M2420 Cfg/l2/vlan/pvlan protocol number, Protocol-based Vlan Configuration

Alteon OS Command Reference

/cfg/l2/vlan/pvlan <protocol number>

Protocol-based VLAN Configuration

[VLAN 1 Protocol 1 Menu]

pty	- Set protocol type
prio	- Set priority to protocol
add	- Add port to PVLAN
rem	- Remove port from PVLAN
del	- Delete protocol
ena	- Enable protocol
dis	- Disable protocol
ports	- Add/Remove a list of ports to/from PVLAN
tagpvl	- Enable/Disable port tagging for PVLAN
taglist	- Enable tagging a port list for PVLAN
cur	- Display current PVLAN configuration

Use this menu to configure Protocol-based VLAN (PVLAN) for the selected VLAN.

Table 6-56PVLAN Menu Options (/cfg/l2/vlan/pvlan)

Command Syntax and Usage

pty <(Ether2SNAPLLC)> <Ethernet type>

Configures the frame type and the Ethernet type for the selected protocol. Ethernet type consists of a 4-digit (16 bit) hex code, such as 0080 (IPv4).

prio <0-7>

Configures the priority value for this PVLAN.

add

Adds a port to the selected PVLAN.

rem

Removes a port from the selected PVLAN.

del

Deletes the selected protocol configuration from the VLAN.

ena

Enables the selected protocol on the VLAN.

dis

Disables the selected protocol on the VLAN.

ports

Defines a list of ports that belong to the selected protocol on this VLAN. Enter 0 (zero) to remove all ports.

40M2420, April 2007 Chapter 6: The Configuration Menu „ 249