Nortel Networks 40M2420 manual Cfg/sys/access, System Access Configuration

Alteon OS Command Reference

cfg/sys/access

System Access Configuration

[System Access Menu]
mgmt	- Management Network Definition Menu
user	- User Access Control Menu (passwords)
http	- Enable/disable	HTTP (Web) access
https	- HTTPS Web Access Menu
wport	- Set HTTP (Web)	server port number
snmp	- Set SNMP access control
userbbi	- Enable/disable	user configuration from BBI
tsbbi	- Enable/disable	telnet/ssh configuration from BBI
tnet	- Enable/disable	Telnet access
tnport	- Set Telnet server port number
tport	- Set the TFTP port for the system
cur	- Display current system access configuration

Table 6-19System Access Menu Options (/cfg/sys/access)

Command Syntax and Usage

mgmt

Displays the Management Configuration Menu. To view menu options, see page 203.

user

Displays the User Access Control Menu. To view menu options, see page 204.

http disableenable

Enables or disables HTTP (Web) access to the Browser-Based Interface. It is enabled by default.

https

Displays the HTTPS Menu. To view menu options, see page 207.

wport <TCP port number (1-65535)>

Sets the switch port used for serving switch Web content. The default is HTTP port 80. If Global Server Load Balancing is to be used, set this to a different port (such as 8080).

snmp disableread-onlyread-write

Disables or provides read-only/write-read SNMP access.

userbbi enabledisable

Enables or disables user configuration access through the Browser-Based Interface (BBI).

tsbbi enabledisable

Enables or disables Telnet/SSH configuration access through the Browser-Based Interface (BBI). You see this command only if you are connected to the switch through a serial connection.

tnet enabledisable

Enables or disables Telnet access. This command is enabled by default. You see this command only if you are connected to the switch through a serial connection.

40M2420, April 2007 Chapter 6: The Configuration Menu „ 201