Nortel Networks 40M2420 manual Cfg/l3/ospf/virt link number, Ospf Virtual Link Configuration

Alteon OS Command Reference

/cfg/l3/ospf/virt <link number>

OSPF Virtual Link Configuration

[OSPF Virtual	Link 1 Menu]
aindex	- Set area index
hello	- Set hello interval in seconds
dead	- Set dead interval in seconds
trans	- Set transit delay in seconds
retra	- Set retransmit interval in seconds
nbr	- Set router ID of virtual neighbor
key	- Set authentication key
mdkey	- Set MD5 key ID
enable	- Enable interface
disable	- Disable interface
delete	- Delete interface
cur	- Display current OSPF interface configuration

Table 6-76OSPF Virtual Link Configuration Menu Options (/cfg/l3/ospf/virt)

Command Syntax and Usage

aindex <area index (0-2)> Configures the OSPF area index.

hello <value (1-65535)>

Configures the authentication parameters of a hello packet, in seconds.

dead <value (1-65535)>

Configures the health parameters of a hello packet, in seconds. Default is 60 seconds.

trans <value (1-3600)>

Configures the delay in transit, in seconds. Default is one second.

retra <value (1-3600)>

Configures the retransmit interval, in seconds. Default is five seconds.

nbr <NBR router ID (IP address)>

Configures the router ID of the virtual neighbor. Default is 0.0.0.0.

key <password>

Configures the password (up to eight characters) for each virtual link. Default is none.

mdkey <key ID (1-255)>none

Sets MD5 key ID for each virtual link. Default is none.

enable

Enables OSPF virtual link.

40M2420, April 2007 Chapter 6: The Configuration Menu „ 275