Nortel Networks 40M2420 manual Fiber Port SFP Status, Information Dump, Info/sfp, Info/dump

Alteon OS Command Reference

/info/sfp

Fiber Port SFP Status

Port Device TX-Enable RX-Signal TX-Fault

---- ------ --------- --------- --------

EXT1 FI-SFP	enabled	LOST	none
EXT2 FI-SFP	enabled	LOST	none
EXT3 FI-SFP	enabled	LOST	none
EXT4 FI-SFP	enabled	LOST	none
EXT5 FI-SFP	enabled	LOST	none
EXT6 FI-SFP	enabled	LOST	none

This command displays the status of the Small Form Pluggable (SFP) module on each Fiber External Port.

/info/dump

Information Dump

Use the dump command to dump all switch information available from the Information Menu (10K or more, depending on your configuration). This data is useful for tuning and debugging switch performance.

If you want to capture dump data to a file, set your communication software on your worksta- tion to capture session data prior to issuing the dump commands.

40M2420, April 2007 Chapter 4: The Information Menu „ 119