Nortel Networks 40M2420 Lacp Port Configuration, 51LACP Port Menu Options /cfg/l2/lacp/port, Prio

Alteon OS Command Reference

/cfg/l2/lacp/port <port alias or number>

LACP Port Configuration

[LACP Port EXT1		Menu]
mode	-	Set LACP mode
prio	-	Set LACP port priority
adminkey	-	Set LACP port admin key
cur	-	Display current LACP port configuration

Use the following commands to configure Link Aggregation Control Protocol (LACP) for the selected port.

Table 6-51LACP Port Menu Options (/cfg/l2/lacp/port)

Command Syntax and Usage

mode offactivepassive

Set the LACP mode for this port, as follows:

„off

Turn LACP off for this port. You can use this port to manually configure a static trunk. The default value is off.

„active

Turn LACP on and set this port to active. Active ports initiate LACPDUs.

„passive

Turn LACP on and set this port to passive. Passive ports do not initiate LACPDUs, but respond to LACPDUs from active ports.

prio <1-65535>

Sets the priority value for the selected port. Lower numbers provide higher priority. Default is 32768.

adminkey <1-65535>

Set the admin key for this port. Only ports with the same admin key and oper key (operational state generated internally) can form a LACP trunk group.

cur

Displays the current LACP configuration for this port.

40M2420, April 2007 Chapter 6: The Configuration Menu „ 243