Nortel Networks 40M2420 manual 25Port Configuration Menu /cfg/port

Alteon OS Command Reference

/cfg/port <port alias or number>

Port Configuration

[Port INT1 Menu]		Gig Phy Menu
gig	-
aclqos	-	Acl/Qos Configuration Menu
8021ppri	-	Set default 802.1p priority
pvid	-	Set default port VLAN id
name	-	Set port name
dscpmrk	-	Enable/disable DSCP remarking for port
tag	-	Enable/disable VLAN tagging for port
tagpvid	-	Enable/disable tagging on pvid
fastfwd	-	Enable/disable Port Fast Forwarding mode
ena	-	Enable port
dis	-	Disable port
cur	-	Display current port configuration

Use the Port Configuration menu to configure settings for individual switch ports, except the management port (MGT). This command is enabled by default.

Table 6-25Port Configuration Menu (/cfg/port)

Command Syntax and Usage

gig

If a port is configured to support Gigabit Ethernet, this option displays the Gigabit Ethernet Physi- cal Link Menu. To view menu options, see page 210.

aclqos

Displays the ACL Quality of Service Menu. To view menu options, see page 211.

8021ppri <0-7>

Configures the port’s 802.1p priority level.

pvid <VLAN number, 1-4095>

Sets the default VLAN number which will be used to forward frames which are not VLAN tagged. The default number is 1 for non-management ports.

name <64 character string>none

Sets a name for the port. The assigned port name appears next to the port number on some infor- mation and statistics screens. The default is set to None.

dscpmark

Enables or disables DSCP re-marking on a port.

tag disableenable

Disables or enables VLAN tagging for this port. It is disabled by default.

208 „ Chapter 6: The Configuration Menu 40M2420, April 2007