Nortel Networks 40M2420 manual Cist, Trunk, Vlan, Gen

Alteon OS Command Reference

Table 4-12Layer 2 Menu Options (/info/l2)

Command Syntax and Usage

cist

Displays Common internal Spanning Tree (CIST) bridge information, including the following:

„Priority

„Hello interval

„Maximum age value

„Forwarding delay

You can also view port-specific CIST information, including the following:

„Port number and priority

„Cost

„State

For details, see page 88.

trunk

When trunk groups are configured, you can view the state of each port in the various trunk groups. For details, see page 91.

vlan

Displays VLAN configuration information, including:

„VLAN Number

„VLAN Name

„Status

„Port membership of the VLAN

For details, see page 91.

gen

Displays general Layer 2 information.

dump

Dumps all switch information available from the Layer 2 menu (10K or more, depending on your configuration).

If you want to capture dump data to a file, set your communication software on your workstation to capture session data prior to issuing the dump commands.

40M2420, April 2007 Chapter 4: The Information Menu „ 75