Nortel Networks 40M2420 manual Cfg/l3/igmp/snoop/igmpv3, Igmp Version 3 Configuration

Alteon OS Command Reference

Table 6-85IGMP Snoop Menu Options (/cfg/l3/igmp/snoop)

Command Syntax and Usage

ena

Enables IGMP Snooping.

dis

Disables IGMP Snooping.

cur

Displays the current IGMP Snooping parameters.

/cfg/l3/igmp/snoop/igmpv3

IGMP Version 3 Configuration

[IGMP V3	Snoop Menu]
sources		- Set the number of sources to snoop in group record
v1v2		- Enable/disable snooping IGMPv1/v2 reports
exclude		- Enable/disable snooping EXCLUDE mode reports
ena		- Enable IGMPv3 Snooping
dis		- Disable IGMPv3 Snooping
cur		- Display current IGMP Snooping V3 configuration

Table 6-88describes the commands used to configure IGMP version 3.

Table 6-86IGMP V3 Menu Options (/cfg/l3/igmp/snoop/igmpv3)

Command Syntax and Usage

sources <1-64>

Configures the maximum number of IGMP multicast sources to snoop from within the group record. Use this command to limit the number of IGMP sources to provide more refined control.

v1v2 enabledisable

Enables or disables snooping on IGMP version 1 and version 2 reports. When disabled, the switch drops IGMPv1 and IGMPv2 reports. The default value is enabled.

exclude enabledisable

Enables or disables snooping on IGMPv3 Exclude Reports. When disabled, the switch ignores Exclude Reports. The default value is enabled.

ena

Enables IGMP version 3. The default value is disabled.

40M2420, April 2007 Chapter 6: The Configuration Menu „ 287