Nortel Networks 40M2420 manual 47Trunk Configuration Menu Options /cfg/l2/trunk

Alteon OS Command Reference

/cfg/l2/trunk <trunk group number>

Trunk Configuration

[Trunk group 1 Menu]

add	- Add port to trunk group
rem	- Remove port from trunk group
ena	- Enable trunk group
dis	- Disable trunk group
del	- Delete trunk group
cur	- Display current Trunk Group configuration

Trunk groups can provide super-bandwidth connections between GbE Switch Modules or other trunk capable devices. A trunk is a group of ports that act together, combining their bandwidth to create a single, larger port. Up to 13 trunk groups can be configured on the GbE Switch Mod- ule, with the following restrictions:

„Any physical switch port can belong to no more than one trunk group.

„Up to six ports/trunks can belong to the same trunk group.

„Configure all ports in a trunk group with the same link configuration (speed, duplex, flow control).

„Trunking from non-Alteon devices must comply with Cisco® EtherChannel® technology.

By default, each trunk group is empty and disabled.

Table 6-47Trunk Configuration Menu Options (/cfg/l2/trunk)

Command Syntax and Usage

add <port alias or number>

Adds a physical port to the current trunk group.

rem <port alias or number>

Removes a physical port from the current trunk group.

ena

Enables the current trunk group.

dis

Disables the current trunk group.

del

Removes the current trunk group configuration.

cur

Displays current trunk group parameters.

40M2420, April 2007 Chapter 6: The Configuration Menu „ 239