Nortel Networks 40M2420 manual Temporarily Disabling a Port, Port ACL Configuration, Add aclblkgrp

Alteon OS Command Reference

Temporarily Disabling a Port

To temporarily disable a port without changing its stored configuration attributes, enter the fol- lowing command at any prompt:

Main# /oper/port <port alias or number>/dis

Because this configuration sets a temporary state for the port, you do not need to use apply or save. The port state will revert to its original configuration when the GbE Switch Module is reset. See the “Operations Menu” on page 324 for other operations-level commands.

/cfg/port <port alias or number> aclqos

Port ACL Configuration

[Port INT2 ACL Menu]
meter	- ACL Metering Configuration Menu
re-mark	- ACL Re-mark Configuration Menu	this port
add	- Add ACL, ACL block or ACL group to
rem	- Remove ACL, ACL block or ACL group	from this port
cur	- Display current ACLs for this port

Table 6-27Port ACL Menu Options (/cfg/port/aclqos)

Command Syntax and Usage

meter <meter number, 1-127>

Displays the Metering Menu. To view menu options, see page 212.

re-mark<re-mark number, 1-127>

Displays the Re-Mark Menu. To view menu options, see page 213.

add aclblkgrp <1-4096>

Adds the specified ACL, ACL Block, or ACL Group to the port. You can add multiple ACL Groups to a port, but the total number of precedence levels allowed is eight.

rem aclblkgrp <1-4096>

Removes the specified ACL, ACL Block, or ACL Group from the port.

cur

Displays current ACL QoS parameters.

40M2420, April 2007 Chapter 6: The Configuration Menu „ 211