Enterasys Networks X-PeditionTM Reports and Alarms, Clear Statistics, Map-Class Configuration

FRF.12 Fragmentation

until you enter the copy running config startup config command to copy the running configuration into the startup configuration file within Flash.

Map-Class Configuration

The Map Class configures a common profile (characteristics) that can be applied to PVCs, eliminating the need to configure parameters on all individual PVCs. The map-classframe-relaycommand

configures a FR map class.

Show Running Configuration

The show running-configurationcommand displays the running configuration on the screen.

Note: Only those parameters different than default values are displayed.

Displaying Statistics

The following show commands display Frame Relay statistics:

•show frame-relay lmi — displays global or interface LMI counters.

•show frame-relay map — displays DLCIs and remote nodes’ IP addresses discovered by Inverse ARP.

•show frame-relay traffic — displays Inverse ARP traffic statistics.

•show frame-relay pvc — displays global or per interface, sub-interface or DLCI data.

•show fragment — displays fragmentation information in a summary or detailed format.

•show map-class— displays class information for all configured map-classes as well as the interfaces which are registered with them.

Reports and Alarms

The FR-related alarms are described in Appendix A: “Alarms/Events, System Limits, and Standard ASCII Table” on page A-1.

Clear Statistics

When it becomes necessary, you can strip the Inverse ARP Table and other tables of FR statistics with the clear frame-relay inarp and clear frame-relay counter commands. The clear frame-relay inarp command deletes particular or global FR port data and the clear frame- relay counter command deletes specific or global DLCI or FR port data.

XSR User’s Guide 9-9