Enterasys Networks X-PeditionTM manual XSRconfig#username toronto privilege 0 password cleartext z

Backup Configuration

XSR(config-if<D2>)#dialer pool 22

XSR(config-if<D2>)#dialer string 2501

XSR(config-if<D2>)#ip address 20.20.20.1 255.255.255.0

The following command configures backup Dialer interface 1 on Serial sub-interface 2/0:0:

XSR(config)#interface serial 2/0:0

XSR(config-if<S2/0:0>)#no shutdown

XSR(config-if<S2/0:0>)#backup interface dialer1

XSR(config-if<S2/0:0>)#encapsulation ppp

XSR(config-if<S2/0:0>)#ip address 30.30.30.1 255.255.255.0

The following command configures backup Dialer interface 2 on Serial sub-interface 2/0:1:

XSR(config)#interface serial 2/0:1

XSR(config-if<S2/0:1>)#no shutdown

XSR(config-if<S2/0:1>)#backup interface dialer 2

XSR(config-if<S2/0:1>)#encapsulation ppp

XSR(config-if<S2/0:1>)#ip address 40.40.40.1 255.255.255.0

Node C (Called Node) Configuration

The following command configures a Node A user for authentication:

XSR(config)#username toronto privilege 0 password cleartext z

The following commands configure two channel groups with a total of three timeslots on T1 sub- interface 1/2:0:

XSR(config)#controller t1 1/2/0

XSR(config-controller<T1-1/2:0>)#channel-group 1 timeslots 2

XSR(config-controller<T1-1/2:0>)#channel-group 0 timeslots 1

XSR(config-controller<T1-1/2:0>))#no shutdown

The following commands add a dialer pool member and set the Central Office switch type on BRI port 1/0:

XSR(config)#interface bri 1/0

XSR(config-if<BRI-1/0>)#isdn switch-type basic-net3

XSR(config-if<BRI-1/0>)#dialer pool-member 28

XSR(config-if<BRI-1/0>)#no shutdown

One of the following commands sets PAP authentication on Dialer interface 0:

XSR(config)#interface dialer 0

XSR(config-if<D0>)#encapsulation ppp

XSR(config-if<D0>)#ppp authentication pap

The following commands add a dialer pool and specify the PPP authenticated username Toronto to map incoming calls on Dialer interface 1:

XSR(config)#interface dialer 1

XSR(config-if<D1>)#no shutdown

XSR(config-if<D1>)#dialer pool 28

XSR(config-if<D1>)#encapsulation ppp

XSR(config-if<D1>)#dialer remote-name Toronto

XSR(config-if<D1>)#ip address 10.10.10.3 255.255.255.0

The following commands add a dialer pool and map incoming Node A calls to Node C’s 2500 number:

XSR(config)#interface dialer 2

10-38 Configuring Dialer Services