Enterasys Networks X-PeditionTM EtsysVpnIpsecProposal Table, EtsysVpnIpsecPropTransforms Table

VPN MIB Tables

etsysVpnIpsecProposal Table

This table contains the IPSec proposals. The table index is {etsysVpnIpsecPropName}.

Table B-37 etsysVpnIpsecProposalTable

Field	Description
etsysVpnIpsecPropName	The name of an IPSec proposal.
etsysVpnIpsecPropMaxLifetimeSec	Acceptable values are 300-8640000 seconds with a default of
	28800. When used to create a row, all other values are defaulted.
etsysVpnIpsecPropMaxLifetimeKB	Since the CLI does not allow this to be set, the XSR implements this
	as read-only.
etsysVpnIpsecPropUsePfs
etsysVpnIpsecPropGroupId
etsysVpnIpsecPropRowStatus	Acceptable values are active(1), createAndGo(4) and destroy(6).
	When used to create a row, all values are defaulted.

etsysVpnIpsecPropTransforms Table

This table aggregates transforms from the ipspAhTransformTable, ipspEspTransformTable, and ipspIpcompTransformTable into transform sets. The table index is {etsysVpnIpsecPropName, etsysVpnIpsecPropTranType}. The table also contains read-only rows for XSR EZ-IPSec transforms.

Table B-38 etsysVpnIpsecPropTransformsTable

Field	Description
etsysVpnIpsecPropTranType	Acceptable values: protoIpsecAh(2) and protoIpsecEsp(3). Since the
	XSR does not support software compression, protoIpcomp(4) is
	unavailable.
etsysVpnIpsecPropTranName	A transform name. This object must be used to create the row. The
	corresponding row in the AH or ESP transform table will be created
	when this row is created. The transform will have default values.
etsysVpnIpsecPropTranRowStatus	Acceptable values: active(1) and destroy(6). This object cannot be
	used to create a row since the transform name is needed first.

etsysVpnAhTransform Table

This table lists all the AH transforms created by adding AH rows to the etsysVpnIpsecPropTransformsTable. The table also contains read-only rows for XSR EZ-IPSec transforms. The table index is {etsysVpnAhTranName}.

Table B-39 etsysVpnAhTransformTable

Field	Description
etsysVpnAhTranName	The name of an AH transform.
etsysVpnAhTranAlgorithm	Acceptable values: hmacMd5(1) and hmacSha(2). This value can be
	set after the row is created via the creation of a row in the
	etsysVpnIpsecPropTransformsTable.
etsysVpnAhTranMaxLifetimeSec	This is read-only for the XSR since etsysIpsecPropLifetimeSec is used
	as a common setting for the proposal.

B-16 XSR SNMP Proprietary and Associated Standard MIBs