Enterasys Networks X-PeditionTM manual Switched BRI Configuration Model

ISDN Configuration

Figure 11-1 .Switched BRI Configuration Model

Dialer Profile

Defines the destination

interface dialer 0

ip address 1.1.1.1 255.255.255.0 encapsulation ppp and other protocol

commands

dialer string 5551000 class remNode1 dialer string 5551000 class remNode2 dialer pool 1

dialer-group 1

Dialer Pool 1

priority

Dialer Pool 2

interface BRI 1/0

isdn switch-type basic-nil

isdn spid1 0555100001 5551000 isdn spid2 0555300001 5553000 dialer pool-member 1 priority 100

... more BRI commands

	e
M	n
	i
	L
	l
Dialer Pool
	a
	i
	D
	interface BRI 1/1

		map-class dialer
		Access List
			Access List
	Dialer List 1
	describes interesting
		packets
XSR
				Access List
				Access List
				Access List

interface dialer 1

ip address 2.2.2.2 255.255.255.0 encapsulation ppp and other protocol

commands

pppmultilink over up to 4 B channels dialer map ip 192.168.1.10 name HOME

212555756

dialer pool M dialer-group 10

	isdn switch-type basic-nil
priority	isdn spid1 0555200001 5552000
	isdn spid2 0555400001 5554000
	dialer pool-member 1 priority 100
	... more BRI commands
		e
		n
		i
		L
		l
		a
		i
		D
		interface BRI 1/2
priority		isdn switch-type basic-nil
		isdn spid1 0555500001 5555000
		isdn spid2 0555700001 5557000
		dialer pool-member 1priority 100
		... more BRI commands
		e
		n
		i
		L
		l
		a
		i
		D

The following example adds a dialer pool and group, and two phone numbers to the called node’s Dialer 0 port. It also configures a second dialer pool and group, a Multilink PPP line to four B channels on the Dialer 1 interface, and maps the 192.168.1.10 network and phone number to BRI interface 1/0, as well as adds a prioritized pool member and six SPIDs. Finally, the example configures two more BRI interfaces with prioritized pool members and two SPIDs each. You can add map class, dialer and access list, BRI, and other protocol commands not shown in the example.

Note: ISDN BRI can be configured on XSR 1200 Series routers but only on interface FastEthernet 0:<1-2>.<1-30>. All BRI examples in this chapter reference Ethernet interfaces on XSR 1800/3000 Series routers.

XSR(config)#interface dialer 0

XSR(config-if<D0>)#ip address 1.1.1.1 255.255.255.0

XSR(config-if<D0>)#encapsulation ppp

XSR(config-if<D0>)#dialer string 5551000 class remNode1

XSR(config-if<D0>)#dialer string 5551000 class remNode2

XSR(config-if<D0>)#dialer pool 1

XSR(config-if<D0>)#dialer-group 1

XSR(config-if<D0>)#no shutdown

XSR User’s Guide 11-11