Nortel Networks 1000E warranty Installing and configuring on the PC, Req New, Fdn, Cls

Page 436 of 488 Installing and configuring IP Phones

Procedure 111

Configuring the IP Softphone 2050

1Access LD 11. Enter the command:

LD 11

2Enter appropriate responses shown in Table 55.

Table 55

LD 11 – Configure the IP Softphone 2050

Prompt	Response	Description
REQ:	NEW	Add new data
	CHG	Change existing data
TYPE:	I2050	Type of data block
TN	c u	Terminal number
DES	x...x	ODAS telephone designator
CUST	xx	Customer number, as defined in LD 15
...
ZONE	0-255	Zone number
FDN	x...x	Flexible CFNA DN
...
CLS	aaa	Class of service
		HFA - Digital Telephone Handsfree Allowed is default for IP
		Softphone 2050 to enable the USB interface
			End of Procedure

Installing and configuring on the PC

Installing the USB Headset Kit

Installing the USB Headset Kit application after the IP Softphone 2050 software application enables the IP Softphone 2050 application to show it as an audio device option during the installation. If the USB Headset Kit is

553-3041-210 Standard 4.00 September 2007