Nortel Networks 1000E warranty Upgrade boot sequence, CPU PC Pentium

Installing and configuring the Signaling Server software Page 173 of 488

3If this is a re-installation on an existing system, observe the boot sequence. Enter c at the boot menu shown in Figure 47.

Note: Entering c in the “ISP1100 System Boot” banner screen speeds up this process, as the keyboard input is buffered.

Figure 47

Upgrade boot sequence

ISP1100 System Boot

Copyright 2002-2004 Nortel Networks, Inc.

CPU: PC PENTIUM

Version: x

BSP version: 1.2/0

Creation date: Apr 22 2004, 15:44:38

ataDrv 1.0: ATAPI Drive Found Controller 1 drive 0 Controller 1 drive 1

ATAPI Controller 1 #drives found = 1 Read boot parameters from:

[C]DROM [H]ard Disk 5 [H]

Note: If you do not select c within the ten-second time-out, the Signaling

Server boots to the existing software on the hard disk.

4Enter b at the menu shown in Figure 48 on page 174.

Communication Server 1000E Installation and Configuration