Nortel Networks 1000E Inserting the Retaining Pin, Retaining Pin fully inserted End of Procedure

Page 334 of 488 Installing and configuring a Voice Gateway Media Card

Press the Retaining Pin into the hole until the pin clicks as it locks into position (labeled 2 in Figure 111). The underside of the head of the Retaining Pin should be flat against the card.

Figure 111

Inserting the Retaining Pin

7Turn the card over to view the front of the card. Ensure the Retaining Pin is in place, as shown Figure 112 on page 334.

Figure 112

Retaining Pin fully inserted

End of Procedure

553-3041-210 Standard 4.00 September 2007