Nortel Networks Installing software on an MG 1000E Small System Controller, PC card interface

240

Page 235 of 488

Installing software on an MG 1000E Small System Controller

Contents

This section contains information on the following topics:

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235

Installing software on an MG 1000E SSC . . . . . . . . . . . . . . . . . . . . . . 236

Introduction

This chapter describes the software installation on the Small System

Controller (SSC) in an MG 1000E using the software delivery card.

PC card interface

The SSC card has a PC card interface through a socket located on its faceplate. The PC card socket can accommodate a Software Delivery card used for software upgrading and for backup data storage. This chapter contains Procedure 59: "Installing software on an MG 1000E SSC" on page 236.

CAUTION — Service Interruption

The Nortel Networks Communication Server 1000E Release 4.5 software must be installed prior to installing the SSC software in the Media Gateways.

Media Gateways can be installed in any order.

Communication Server 1000E Installation and Configuration