Nortel Networks warranty CS 1000E Core Call Server SDI connection

	Configuring a terminal and SDI ports		Page 269 of 488
Figure 87
VT220 setup values
	Global Set-Up
	On Line	Comm1=RS232
	Sessions on Comm1		70Hz
	CRT Saver	Printer Shared
	Display Set-Up
	80 Columns	Light Text, Dark Screen
	Interpret Controls	Cursor
	Auto Wrap	Block Style Cursor
	Jump Scroll
	General Set-up
	VT200 Mode, 7-bit Controls	Application Keypad
	User Defined Keys Unlocked	Normal Cursor Keys
	User Features Unlocked	No New Line
	Multinational
	Communications Set-Up
	Transmit=2400	No Local Echo
	Receive=Transmit	Data Leads Only
	Xoff at 64	Disconnect, 2 s Delay
	8bits, No Parity	Limited Transmit
	1 Stop Bit
	Printer Set-Up
	Speed=9600
	Normal Print Mode	Print Full Page
	8bits, No Parity,	Print National Only
	1 Stop bit	No Terminator
	Keyboard Set-up
	Typewriter Keys	Warning Bell
	Caps Lock	Break
	Auto Repeat	Answerback=
	Keyclick High	Not Concealed
	Margin Bell
	Tab Set-Up Screen
	Leave this screen at the default values

CS 1000E Core Call Server SDI connection

Each CS 1000E Core Call Server has two SDI ports on the Call Server CPU card, COM1 and COM2. Both COM1 and COM2 are standard RS232 DTE ports (9-pin male). COM1 is used for maintenance access, and COM2 is for an external modem connection. Both SDI ports, COM1 and COM2, are set to:

•Baud rate - 9600

•Data bit - 8

•Stop bit - 1

Communication Server 1000E Installation and Configuration